China OEM
Sort by
Show result

40 PINS SINGLE ROW ROUND FEMALE HEADER PIN, 40 WAYS ( 40 PINS ), 1 x 40 WAYS, TURN PIN, 2.54MM PITCH

SPECIFICATION

  • Type of connector : Straight pin header - Female connector
  • Type of row : Single row
  • Pin type : Round
  • Number of pins : 40 pin, breakable pin header strip
  • Pitch : 2.54mm (0.1") pitch
  • Pin length : 3mm
  • Insulator length : 3mm
  • Material : Tin plated + Plastic
  • Colour : Silver, Black
RM0.85

40 PINS T-TYPE GPIO EXTENSION BOARD ADAPTOR FOR RASPBERRY PI 4B / 3B+ / 3B / 2B WITH 40P RAINBOW RIBBON CABLE

This GPIO Extension Board is compatible to Raspberry Pi 4B / 3B+ / 3B / 2B. It leads Raspberries Pi GPIO to the breadboard through 40 pins ribbon cable. It is more convenient to DIY debugging and make it so easy to interface with Raspberry Pi GPIO Pins. 

SPECIFICATIONS

  • Compatible with Raspberry Pi 4B / 3B+ / 3B / 2B
  • All 40 pins GPIO interface leads out
  • All 40 pins are labeled for easy prototyping
  • Gold plated connectors
  • Includes 40 pins colorful ribbon cable
  • Output voltage: 3.3 V and 5 V dc voltage output dc voltage output
  • Using Atmel Atmega328 microprocessor controller

Package include:

  • 1 x Raspberry Pi T-Type GPIO Extension Board
  • 1 x 40 Pins Rainbow Ribbon Cable
RM7.70

5 X 7 LED Dot Matrix Display, 3MM Red, Common Anode, 1057BS

FEATURES

  • High efficiency and low power consumption.
  • Uniform illumination.
  • Wide viewing angle vertically and horizontally.
  • Application : audio equipment, instrument panels, digital read out display and so on.
  • 3mm dot matrix LED display, suitable for audio equipment and digital read out display.

SPECIFICATION

  • Emitting color : Red
  • Type : Common anode
  • Luminous intensity : 10mcd
  • Forward voltage : 1.8V 
  • Rated current : 15mA
  • Operating temperature range : -25 to +95 degree Celsius
RM3.50

The ceramic fuse is used for protection in electrical distribution, electrical circuits and various industrial applications against overload and short circuit.

Features 

  • Small size
  • Full range protection
  • Safest and most reliable protection system
  • High limiting and breaking capacity
  • Low power dissipation

Specifications

  • Material: Ceramic Tube, Nickel-plated Brass End Cap
  • Rated Voltage: 500V
  • Rated Current: 10A
  • Diameter: 10mm / 0.4 inch
  • Length: 38mm / 1.5 inch
RM1.65

FEATURES

  • General purpose 5mm bi-color red / green round head/top LED
  • Class A grade
  • Constant luminous
  • Suitable for any electronic and microcontroller circuitry
RM0.50

FEATURES

  • General purpose 5mm bi-color red / green round head/top LED, 3 pins
  • Class A grade
  • Constant luminous
  • Suitable for any electronic and microcontroller circuitry
RM0.50

FEATURES

  • General purpose 5mm round head/top LED
  • Suitable for all type of applications that require indicator
  • Class A grade
  • Constant luminous
  • Available in red, yellow, blue, green, orange colour
  • Suitable for any electronic and microcontroller circuitry
RM0.50

5MM RGB LED (4 PINS) COMMON CATHODE SUPER BRIGHT WATER CLEAR 2PCS / PACK

This is a 5mm RGB LED (Red Green Blue) with four pins. Triple output with a common cathode, this RGB LED can be used for three status indicators or pulse width modulates all three and gets mixed color.

Specifications

  • Size:5mm
  • Emitted Color : Red / Green / Blue
  • Lens Color : Water Clear / Super Bright
  • Viewing Angle : Approx. 25 degrees
  • Number of Pins : 4
  • Pins Sequence: Red / Common Cathode / Green / Blue
  • Forward Voltage (@20mA) : 1.8 ~ 3.4 Vdc
  • Forward Current : 20mA
  • Peak Forward Current : 30mA
  • Reverse Current (@5V) : 10uA
  • Peak Emission Wavelength : Red, 625nm; Green, 520nm; Blue, 467.5nm
  • Wavelength (@20mA) : Red, 620~625nm; Green, 515~520nm; Blue, 465~467.5nm
  • Luminous Intensity (@20mA) : Red, 800mcd; Green, 4000mcd; Blue, 900mcd 
  • Note : Please add current limiting resistor ranging 220ohm to 1kohm in the test circuit to avoid the damage of LED 
RM0.80

FEATURES

  • General purpose 5mm super bright bi-color red / green round head/top LED, 2 pins
  • Class A grade
  • Constant luminous
  • Suitable for any electronic and microcontroller circuitry
RM0.80

FEATURES

  • General purpose 5mm round head/top super bright blue LED
  • Class A grade
  • Constant luminous
  • Suitable for any electronic and microcontroller circuitry
RM0.50

FEATURES

  • General purpose 5mm round head/top super bright red LED
  • Class A grade
  • Constant luminous
  • Suitable for any electronic and microcontroller circuitry
RM0.50

The AA size battery holder can hold 6 x 1.5V AA size batteries and can be used as a 7.2V rechargeable or 9V ordinary (non-rechargeable) batteries pack for your various projects as it comes with a pre-soldered 2.1mm DC power jack / plug that easily plugs in into any female DC power jack / socket. The 12cm wires are terminated with a standard 5.5×2.1mm, center positive DC power jack / plug connector.

SPECIFICATIONS

  • Voltage : 9V (Non-rechargeable batteries) or 7.2V (Rechargeable batteries)
  • Material : ABS Plastic
  • Power : 6 x 1.5V AA batteries
  • Connection : Series
  • Color : Black
  • Plug : DC2.1mm type
  • Cable Length : 12cm
  • Net Weight : 25g
  • Dimension : 58mm x 90mm x 15mm (L*W*H)
  • Batteries not included

PACKAGE CONTENT : 1 x 6 Cells / Slots 6 x AA 1.5V Battery Holder Casing with 5.5 x 2.1mm DC Power Jack / Plug

RM4.30

FEATURES

  • Imported and high quality long lasting ceramic heating element
  • Temperature adjustable
  • Heat up fast and work great, 60 Watts, thermostat range 200°C~450°C
  • Professional soldering tool suitable for lead-free and leaded soldering jobs
  • Soft grip handle design for maximum comfort and reduced slippage
  • Various soldering iron tips can be replaced to meet different basic soldering jobs
  • Easy to use: No need soldering station, just plug and play
  • Ideal for hobbies, kits, radios, laptop, computer and electronics work

​SPECIFICATIONS

  • Working voltage : 220~240Vac, 50Hz
  • Rated power : 60W
  • Pre-heating time : 55s
  • Temperature control : 200°C~450°C
  • Soldering iron length : 148mm (handle) + 75mm (iron)
  • Plug type : UK / Malaysia / Hong Kong 3 pin plug (fused)
  • Cable length : Approx. 1.4m
  • Weight : 93g

 

RM15.50

A male to male jumper wireS with 65 pieces in a pack There are 4 different length : 240mm, 200mm, 150mm and 110mm Suitable for breadboarding, microcontrollers projects such as Arduino, Raspberry Pi, MicroBit, PIC, 8951 and etc.

  • Material : Copper-clad steel and PVC
  • Good conductivity and can be used repeatedly
  • The length of wires is approx 11cm to 24cm : 240mm x 4pcs, 200mm x 4pcs, 150mm x 8pcs, 110mm x 49pcs. Total number of wires : 65pcs.
  • Type : Male to Male
  • Weight : 34g (approx)
  • Color : Multicolor (as shown in pictures)
  • Practical : Essential wires for breadboarding
  • Useful : The jumper wire is ideal for assembling electronic circuits
  • Advantage : Provides an easy way for you to build your own circuitry on a breadboard
RM3.30

7 SEGMENT DISPLAY SEVEN SEGMENT DISPLAY, 0.56 INCH, SINGLE DIGIT, RED (HIGH BRIGHTNESS), COMMON CATHODE (CC)

 

SPECIFICATIONS

  • Colour : Super Bright Red
  • Type : Common cathode
  • Peak forward current : 150mA
  • Continuous forward current : 20mA
  • Power dissipation : 40mW
  • Reverse voltage : 5V
  • Forward voltage : 1.9~2.4V at 20mA
  • Luminous Intensity : 100mcd max at 20mA
  • Peak wavelength : 620~640nm
  • Digit : 1
  • Digit height : 14.2mm (0.56")
  • Overall height : 19mm
  • Pitch : 2.54mm
  • Pin : 10
RM0.70