PCB and Breadboard
PCB and Breadboard
Sort by
Show result
  • MODEL : GL-12
  • BRAND : C&D
  • 840 Tie points
  • 128 Groupof 5 connected terminals
  • 8 Bus of 25 connected terminals
  • Can be expanded by interlocking with other GL-12
  • Size: 175 x 67 x 8 mm

 

RM3.80
Excellent choice for hobbyist for development and prototyping work. Stripboard / Veroboard is designed primarily for hard wiring of ICs and discrete components. Stripboard / Veroboard is manufactured from copper clad laminated board which has been pierced with a grid of holes and machined to provide parallel tracks.
 
Punched on 0.1" pitch (2.54mm) with 1mm diameter holes

Specification

  • Board size : 150 x 90 mm
  • Column no. : 32
  • Holes no.per column : 50
RM1.30

FR1 14.5 x 6.5cm STRIPBOARD VEROBOARD PROTOTYPE PCB BOARD

Excellent choice for hobbyist for development and prototyping work. Stripboard / Veroboard is designed primarily for hard wiring of ICs and discrete components. Stripboard / Veroboard is manufactured from copper clad laminated board which has been pierced with a grid of holes and machined to provide parallel tracks.

Specification

  • Type : Single Sided
  • Board size : 145 x 65mm (14.5 x 6.5cm)
  • Column no. : 24
  • Holes no.per column : 55
  • Base Material : FR1 / Bakelite 
  • Thickness : Approx. 1.5mm 
  • Hole Pitch : Approx. 2.54mm 
  • Hole Diameter : Approx. 1.0mm 
RM1.65

FR1 24 x 10cm STRIPBOARD VEROBOARD PROTOTYPE PCB BOARD

Excellent choice for hobbyist for development and prototyping work. Stripboard / Veroboard is designed primarily for hard wiring of ICs and discrete components. Stripboard / Veroboard is manufactured from copper clad laminated board which has been pierced with a grid of holes and machined to provide parallel tracks.

Specification

  • Type : Single Sided
  • Board size : 240 x 100mm (24 x 10cm)
  • Column no. : 36
  • Holes no.per column : 92
  • Base Material : FR1 / Bakelite 
  • Thickness : Approx. 1.5mm 
  • Hole Pitch : Approx. 2.54mm 
  • Hole Diameter : Approx. 1.0mm 

PACKAGE CONTENT : 1 x FR1 24 x 10cm STRIPBOARD VEROBOARD PROTOTYPE PCB BOARD

RM4.00

Single Sided Copper Clad PCB Printed Circuit Board, Phenolic FR1

  • Widely used in product development, prototyping, DIY projects, experiments, maintenance, production, etc.    
  • Suitable for use with CNC routing drilling machines, dry film laminators, screen printed resists, LDI laser direct imaging or etch resist tranfers or marker ink pen. 
  • Suitable etchant ferric chloride or fine etch crystals.
RM1.60

Single Sided Copper Clad PCB Printed Circuit Board

  • Widely used in product development, prototyping, DIY projects, experiments, maintenance, production, etc.    
  • Suitable for use with CNC routing drilling machines, dry film laminators, screen printed resists, LDI laser direct imaging or etch resist tranfers or marker ink pen. 
  • Suitable etchant ferric chloride or fine etch crystals.

SPECIFICATIONS

  • Material : FR4 Glass Fiber
  • Surface Finish : Copper Clad
  • Layers : Single Sided
  • Size : Approx. 120 x 50 cm (47" x 20")
  • Thickness : 1.5 mm

NOTES - This product might have some fingerprints and stain mark, you can clean by super-fine steel-wool or sand paper similar before using. After that be sure to rinse and dry so without any water spots.            

RM94.00

Single Sided Copper Clad PCB Printed Circuit Board

  • Widely used in product development, prototyping, DIY projects, experiments, maintenance, production, etc.    
  • Suitable for use with CNC routing drilling machines, dry film laminators, screen printed resists, LDI laser direct imaging or etch resist tranfers or marker ink pen. 
  • Suitable etchant ferric chloride or fine etch crystals.

 

 

RM2.40

Double Sided Copper Clad PCB Printed Circuit Board

  • Widely used in product development, DIY projects, experiments, maintenance, production, etc.    
  • Suitable for use with CNC routing drilling machines, dry film laminators, screen printed resists, LDI laser direct imaging or etch resist tranfers or marker ink pen. 
  • Suitable etchant ferric chloride or fine etch crystals.

SPECIFICATIONS

  • Material : FR4 Glass Fiber
  • Surface Finish : Copper Clad
  • Layers : Double Sided
  • Size : 15 x 10 cm ± 1%
  • Thickness : 1.5 mm

NOTES - This product might have some fingerprints and stain mark, you can clean by super-fine steel-wool or sand paper similar before using. After that be sure to rinse and dry so without any water spots.             

RM2.80

Single Sided Copper Clad PCB Printed Circuit Board

  • Widely used in product development, prototyping, DIY projects, experiments, maintenance, production, etc.    
  • Suitable for use with CNC routing drilling machines, dry film laminators, screen printed resists, LDI laser direct imaging or etch resist tranfers or marker ink pen. 
  • Suitable etchant ferric chloride or fine etch crystals.
RM1.90

Single Sided Copper Clad PCB Printed Circuit Board

  • Widely used in product development, prototyping, DIY projects, experiments, maintenance, production, etc.    
  • Suitable for use with CNC routing drilling machines, dry film laminators, screen printed resists, LDI laser direct imaging or etch resist tranfers or marker ink pen. 
  • Suitable etchant ferric chloride or fine etch crystals.

 

 

RM9.00

Double Sided Copper Clad PCB Printed Circuit Board

  • Widely used in product development, DIY projects, experiments, maintenance, production, etc.    
  • Suitable for use with CNC routing drilling machines, dry film laminators, screen printed resists, LDI laser direct imaging or etch resist tranfers or marker ink pen. 
  • Suitable etchant ferric chloride or fine etch crystals.
RM13.00

Single Sided Copper Clad PCB Printed Circuit Board

  • Widely used in product development, prototyping, DIY projects, experiments, maintenance, production, etc.    
  • Suitable for use with CNC routing drilling machines, dry film laminators, screen printed resists, LDI laser direct imaging or etch resist tranfers or marker ink pen. 
  • Suitable etchant ferric chloride or fine etch crystals.

 

 

RM18.00
  • MODEL : MB-102
  • Suitable for various types of leaded electronic components
  • 830 Tie points
  • Dual power supply rails
  • Pitch : 2.54mm
  • Double sided tape at reverse side
  • Can be expanded by interlocking with other MB-102 for larger project
  • Size: 165 x 55 x 9 mm
  • Weight : 77g
RM3.80

Mini Solderless Breadboard, 400 Tie-Points, 8.5cm x 5.5 cm for Arduino, Raspberry Pi, MicroBit and etc

Experimenters Mini Solderless Breadboards allow you to easily assemble and test circuits without the use of solder, providing you with a quick and reliable method of prototyping. 

Electrical connection is made by inserting your component lead through the 0.1" spaced holes to the spring clips mounted on metal strips within the ABS plastic board. These strips provide a common electrical connection so additional components can easily be added. 

Breadboard rows and columns are numbered and lettered to assist in component placement and polarities marked on each strip power rail.

Features:

  • Suitable for electronic circuit assembly such as Arduino/Raspberry Pi/MicroBit projects, commissioning and training
  • Accepts most electronic components, including integrated circuits and transistors for digital and/or analog circuitry
  • Dimensions: 55mm (W) x 85mm (L)
  • 2 Distribution Strips Per Side
  • Total of 400 Tie Points
    • 300 Terminal Tie-Points
    • 100 Power Distribution Tie-Points
  • ABS Plastic
  • Completely reuseable
  • Coloured coordinates for easy component placement
  • Phosphor bronze nickel plated spring clips
  • Accepts a variety of wire sizes (20-29 AWG)
  • Self-adhesive tape included on the back

Each board feature slide-in interlocking joints to allow for boards to be joined on either side and also includes a foam adhesive backing to firmly hold down the board to your work surface.

RM2.50

BRAND : ROGERS

FEATURES

•    Lowest electrical loss for reinforced PTFE material
•    Low moisture absorption
•    Isotropic
•    Uniform electrical properties over frequency
•    Excellent chemical resistance

SPECIFICATIONS

  •  RT/duroid 5870
  •  Glass microfiber/PTFE
  •  2.33
  •  0.254 mm (0.010 in)
  •  0.5 OZ
  •  Double sided
  •  0.0012 @ 10 GHz
  •  8.1 pF
  •  457 x 300 mm
  •  18 x 12 in

PACKAGE CONTENT : 1 x Roger RT/Duroid 5870 High Frequency Double Sided PCB

RM135.00